How To
How To
-
Check out this JBL In-Ear Fit Guide video, or read the below article.
In-Ear Fit GuideA proper fit is the most important thing when using in-ear headphones (wired, wireless, TWS). Without a solid, tight fit the headphones will sound thin (lacking bass), not very loud, and will do a poor job of blocking out unwanted sounds.
In-ears, unlike an earbud design, are meant to be pushed into your ear canal, creating a tight seal. If this seal is not accomplished, you will not experience good results.
- Typically speaking, the medium sized ear tip is already installed on your in-ear headphones. If it feels tight or loose, try the other sizes.
- As you try each ear tip, rotate forward and/or back until you create a tight seal as seen here.
NOTE: The image shows a stick style in-ear, but this applies to any in-ear design. - As you are twisting and pushing you will hear the sound quality changing. When you accomplish a tight seal, you’ll hear it. You will have more bass than in any other position, and the leakage from outside noise will be minimized before ever turning on Noise Cancelling (if your headphones have Noise Cancelling).
- If you have one of our headphones that uses the JBL Headphones App, check in the app to see if there is a “Check My Best Fit” banner. This feature will walk you through getting the best fit and will let you know when you’ve accomplished it.
While this may seem a bit daunting, after doing this a few times, inserting the in-ear headphones into your ears and getting a good fit will become second nature and will take a second or two each time, not minutes. But it is definitely worth spending the few moments the first time around, in order to get the most out of your in-ears.
Still not satisfied with the fit? Please check out this Fit Checker Tool, which utilizes your camera and preferences to recommend earbuds that will not only fit great, but sound great as well!
Was this helpful? Thank you for your feedback! -
AKG HEADPHONES APP
Software Update Release Notes
------------------------------------------------------------------------
Version: Android 3.3.15 ; iOS 3.3.16
Release Date: January 18, 2024
What’s New
- Add support for N5 Hybrid & N9 Hybrid
------------------------------------------------------------------------
Version: Android 3.2.10 ; iOS 3.2.11
Release Date: September 25, 2023
What’s New
- Bug fixing and performance improvement
Was this helpful? Thank you for your feedback! -
You can create several different EQ settings that are stored in the memory within the new AKG Headphones app.Was this helpful? Thank you for your feedback!
-
The N700NC does not support Apt-X audio codec.Was this helpful? Thank you for your feedback!
-
In order to use the headphones for phone calls, press the multi-button once when the phone rings. You need to be connected to your device via bluetooth.Was this helpful? Thank you for your feedback!
-
You can use the headphones while charging but only the wired connection will work. No active functions are available since they cannot be switched on.Was this helpful? Thank you for your feedback!
-
When the headphones are charging-Red LED When the headphones are fully charged-The red charging indicator LED turns off When the headphones are looking for a device- Fast blinking blue LED When the headphones are connected to a device-Solid blue LEDWas this helpful? Thank you for your feedback!
-
The memory can support up to 8 paired devices, but only one device can play at a time on the N700NC headphones.Was this helpful? Thank you for your feedback!
-
You cannot disengage ANC, it is always on when the headphones are on. However, you can listen to music via cable if you do not switch the N700 on at all, which means that ANC will not be active.Was this helpful? Thank you for your feedback!
-
You can activate the Ambient Aware and TalkThru functions and assign one of them to the smart-button. AA will open the external microphones and mute the music so you can hear what is going on around you. TalkThru permits you to have a conversation with other people in the room, just by pressing the button.Was this helpful? Thank you for your feedback!
-
Move the ON/OFF button from its OFF position to its ON position, which is the middle of the cutout. It will remain there, and the headphones are now ON. The blue LED will start blinking, indicating that Bluetooth pairing is possible. If you need to reset the BT pairing, move the ON/OFF button against the spring load, to the opposite position of the OFF position, and keep it there for about 5 seconds. Now the BT system is reset, and new pairing is possible.Was this helpful? Thank you for your feedback!
-
Press and hold Volume Up or Volume Down located on the LEFT ear cup for 3 seconds to skip forward or backward.Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Call Us
Talk to a product expert
Call us now at:
(800) 336-4525
Mon - Fri: 9:00 am - 11:00 pm (EST)
Sat - Sun: 9:00 am - 5:00 pm (EST)
Chat With Us
Mon - Fri - 9:00 a.m 11:00 p.m (E.T)
Sat - Sun - 9:00 a.m 5:00 p.m (E.T)