How To
How To
114 results
-
Yes, press and hold the play/pause button for a few seconds. This will activate SIRI on your Apple phone, if the SIRI function has been enabled on the phone.Was this helpful? Thank you for your feedback!
-
Once the order has been placed, it cannot be changed online. If you want to change your order, please call the phone number posted at the top of this page, and if it has not yet been processed we will change or re-issue a new amended order.Was this helpful? Thank you for your feedback!
-
You can't use standard rechargeable batteries with the K912. If you still have the original batteries, and compare them to the generic batteries you are trying to use, you will see the difference on the - ( minus ) side of the battery. On the original battery that comes with the headphones, there is a bare metal band on that side, which connects to a sensor in the headphones ( you can also see this sensor inside the battery compartment, on the - side ). A generic rechargeable battery does not have this metal band for the sensor, so the charger won't charge them. This is for protection, in case you have non-rechargeable batteries in the headphones and put them on the charger. This could cause damage to the headphones.Was this helpful? Thank you for your feedback!
-
Yes, the N40 is equipped with three different sound filters to provide you with personalized sound tuning capabilities. The sound filter options are bass boost, reference sound and high boost.Was this helpful? Thank you for your feedback!
-
Yes, the smooth leather headband from the K601 can be fitted onto the K701, but since it is probably no longer available as a spare part, the only option is to butcher an old 601 to do it. The work involved is very intricate and complicated, and paying a technician to do it is not an economical solution. Owner must be capable of completely dismantling the headphones, including soldering, and to reassemble them. And Harman cannot offer any assistance in doing this. As of late 2017, a new version of K701 is being marketed by AKG Professional. This version features a smooth headband instead of the version with bumps, so the issue no longer applies.Was this helpful? Thank you for your feedback!
-
Yes, the remote control permits you to pick up and stop a call, and activate the voice assistant to place a call.Was this helpful? Thank you for your feedback!
-
No, each headset must have its own transmitter. However, even if you try to use more than one complete set of 915 in the same room simultaneously, it may not work either. Although the 915 has an automatic scan function that finds available slots in the 2.4 gHz transmission frequency band, interference may still occur.Was this helpful? Thank you for your feedback!
-
Yes, you can use the headphones, but of course the noise cancelling will not be active.Was this helpful? Thank you for your feedback!
-
Yes, but only with music via cable, and noise reduction will not be active. As soon as you insert the charging cable micro-usb plug, the Bluetooth and NC functionalities will be switched off, and they cannot be reactivated unless you remove the charging cable, and there must of course be a charge in the battery. If you listen to cabled music while charging, be prepared to hear noise under certain conditions. Both computers and switch-mode power supplies can be very noisy, and this noise can sometimes be heard as a whine or buzz. This can only be eliminated by using a power supply that does not create noise.Was this helpful? Thank you for your feedback!
-
No, you cannot use a lightning connector to charge the N90Q. It can only be charged with the micro USB charger that is provided for you in the packaging. Also, no digital signal transmission can take place from an iPhone, only from Android phones. But some Apple computers will work.Was this helpful? Thank you for your feedback!
-
No, this is not possible. The N90Q is completely self-contained. Also, it is not a Bluetooth headphone.Was this helpful? Thank you for your feedback!
-
Yes, you can listen to the N90Q while they are charging at the same time. Please note that the two cables need to be connected at the same time if you are listening to analog sound. When using digital sound input through the USB cable, charging and digital transmission take place simultaneously.Was this helpful? Thank you for your feedback!
-
No, since this is a fully active headphone, power is necessary. The extra power pack is included to give extra safety.Was this helpful? Thank you for your feedback!
-
Yes, unlike many other Noise Reduction headphones, the N60 will play music, even when the battery is empty. Of course, Noise Cancellation will not be active.Was this helpful? Thank you for your feedback!
-
Yes, the headphone will still work as a pasive headphone.Was this helpful? Thank you for your feedback!
-
Yes, the transmitter / charging dock is designed to be easily hung on a wall with just two screws. Of course the headphone can be charged in this position also.Was this helpful? Thank you for your feedback!
-
Yes, you can use cabled audio connection instead of Bluetooth on the N60NC Wireless, if you prefer. You can listen to a cabled source even if the battery is empty, but the noise cancelling function will of course not be available in this case. If the battery is charged, you can switch noise cancellation on or off at will. You do not have to have a cable connected at all. You can use the headphones as noise cancellers just by putting them on, and switching NC on.Was this helpful? Thank you for your feedback!
-
Yes, but only with certain Android telephones. It is not possible to use iPhones. It is necessary to buy a USB 2.0 cable with Micro-B male plug to Micro-B male plug, OTG functionality. (On-The-Go). This cable is available in different lengths from various electronics shops or web shops. Connecting the telephone and the N90Q with this cable will usually open for digital signal transmission immediately, and the amber charging button on the N90Q will light up as an indication of open connection. (Please note that N90Q can play digital signals from some Apple computers, Macbook, iMac etc.)Was this helpful? Thank you for your feedback!
-
Unfortunately, the Y50BT headphones cannot be paired to multiple devices at the same time.Was this helpful? Thank you for your feedback!
-
The ear-tips can be removed and washed in luke-warm water with a little dish soap. Do not put the headphone into water, it may dried of with a moist cloth. If cloth and a little water doesn't clean sufficiently, use the cleaning-tool which has a brush and scraper to do the job properlyWas this helpful? Thank you for your feedback!
-
No. The audio cable features a one button microphone which allows you to pause/play, change tracks and answer/hang up phone calls. It does not give you the ability to control the volume.Was this helpful? Thank you for your feedback!
-
Yes, both the AAC and the aptX codecs are supported. aptX HD and aptX Low Latency are not supported. Please note that N5005 is an in-ear headphone capable of extremely high audio reproduction quality. Wireless transmission cannot deliver the quality that a first-class analog, cabled signal can. The best possible quality is available with the balanced 4-pole 2.5 mm jack, connected directly to a highest-quality headphone amplifier that supports this connection, fed by the highest quality source.Was this helpful? Thank you for your feedback!
-
Yes, the N20LT features a 3 button microphone that allows you to answer calls, pause/play, skip tracks and control the volume on your IOS device.Was this helpful? Thank you for your feedback!
-
No. The ear cups and headband are made from an animal-free synthetic protein leather.Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Call Us
Talk to a product expert
Call us now at:
(800) 336-4525
Mon - Fri: 9:00 am - 11:00 pm (EST)
Sat - Sun: 9:00 am - 5:00 pm (EST)
Chat With Us
Mon - Fri - 9:00 a.m 11:00 p.m (E.T)
Sat - Sun - 9:00 a.m 5:00 p.m (E.T)