How To
How To
114 results
-
Yes, the smooth leather headband from the K601 can be fitted onto the K701, but since it is probably no longer available as a spare part, the only option is to butcher an old 601 to do it. The work involved is very intricate and complicated, and paying a technician to do it is not an economical solution. Owner must be capable of completely dismantling the headphones, including soldering, and to reassemble them. And Harman cannot offer any assistance in doing this. As of late 2017, a new version of K701 is being marketed by AKG Professional. This version features a smooth headband instead of the version with bumps, so the issue no longer applies.Was this helpful? Thank you for your feedback!
-
Yes, the remote control permits you to pick up and stop a call, and activate the voice assistant to place a call.Was this helpful? Thank you for your feedback!
-
No, each headset must have its own transmitter. However, even if you try to use more than one complete set of 915 in the same room simultaneously, it may not work either. Although the 915 has an automatic scan function that finds available slots in the 2.4 gHz transmission frequency band, interference may still occur.Was this helpful? Thank you for your feedback!
-
Yes, you can use the headphones, but of course the noise cancelling will not be active.Was this helpful? Thank you for your feedback!
-
Yes, but only with music via cable, and noise reduction will not be active. As soon as you insert the charging cable micro-usb plug, the Bluetooth and NC functionalities will be switched off, and they cannot be reactivated unless you remove the charging cable, and there must of course be a charge in the battery. If you listen to cabled music while charging, be prepared to hear noise under certain conditions. Both computers and switch-mode power supplies can be very noisy, and this noise can sometimes be heard as a whine or buzz. This can only be eliminated by using a power supply that does not create noise.Was this helpful? Thank you for your feedback!
-
No, you cannot use a lightning connector to charge the N90Q. It can only be charged with the micro USB charger that is provided for you in the packaging. Also, no digital signal transmission can take place from an iPhone, only from Android phones. But some Apple computers will work.Was this helpful? Thank you for your feedback!
-
No, this is not possible. The N90Q is completely self-contained. Also, it is not a Bluetooth headphone.Was this helpful? Thank you for your feedback!
-
Yes, you can listen to the N90Q while they are charging at the same time. Please note that the two cables need to be connected at the same time if you are listening to analog sound. When using digital sound input through the USB cable, charging and digital transmission take place simultaneously.Was this helpful? Thank you for your feedback!
-
No, since this is a fully active headphone, power is necessary. The extra power pack is included to give extra safety.Was this helpful? Thank you for your feedback!
-
Yes, unlike many other Noise Reduction headphones, the N60 will play music, even when the battery is empty. Of course, Noise Cancellation will not be active.Was this helpful? Thank you for your feedback!
-
Yes, the headphone will still work as a pasive headphone.Was this helpful? Thank you for your feedback!
-
Yes, the transmitter / charging dock is designed to be easily hung on a wall with just two screws. Of course the headphone can be charged in this position also.Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Call Us
Talk to a product expert
Call us now at:
(800) 336-4525
Mon - Fri: 9:00 am - 11:00 pm (EST)
Sat - Sun: 9:00 am - 5:00 pm (EST)
Chat With Us
Mon - Fri - 9:00 a.m 11:00 p.m (E.T)
Sat - Sun - 9:00 a.m 5:00 p.m (E.T)